1. ____ is used in static enviroment.
a. arp
b. ipconfig
c. route<-----
2. _____ enables you to look at the current system and you can
see other systems on the network.
a. arp
b. NT Diagnostics<----
c. tracert
3. ____ will show the routing table.
a. route print<----
b. Print
c. NBTSTAT
Q1. Which utility helps to determine which port is not
working?
a) Network Monitor
b) IPCONFIG
c) NBTSTAT
d) NETSTAT
Ans. (d)
Q2. ______ tool enables you to look at processor usage for
each and every process that runs on the system and track it over a period of
time.
a) TRACERT-P
b) ARP
c) Network Monitor
d) Performance monitor
Ans. (d)
Q3. Event viewer keeps track which of the following 3 logs?
a) NT Diagnostics
b) APIs
c) System
d) Version
e) security
f) Application
Ans. (c,e, & f)
Q4. Text print jobs are fine, but other jobs did not come out
good. This is generally a problem with using the ______command.
a) LPR
b) LPD
c) LPT1
Ans. (b)
3. This is where all the different parts of the the system
reports errors___________
A. NT Diagnostics
B. Network Monitor
C. Event Viewer
D. Performance Monitor
(Answer C, Page 570)
4. This is the utility that enables you to verify the basic
network connectivity of the protocol stack.
A. IPCONFIG
B. NETSTAT
C. Ping
D. NBSTAT
(Answer C, Page 568)
1. Event viewer keeps track of ______, ______and __________.
System, Security, Application
2.List the six series steps used to determine connectivity.
Ping 127.0.0.1 Ping your IP address Ping local IP address Ping remote IP address
Ping host name Ping NetBIOS name
3._______is a useful tool that displays important information
such as resources, memory, services, for your system but also that of network
systems. Choose all that apply
a. NT Diagnostics *
b. Event Viewer
c. Performance monitor *
d. tracert
1) Which is the utility where all parts of the system log
errors?
a) NETSTAT
b) Performance Monitor
c) NBTSTAT
d) Event Viewer *
2) Which utility enables you to verify basic network
connectivity?
a) TRACERT
b) NETSTAT
c) Ping
*
d) Network Monitor
__________ enables you to verify basic network connectivity and the
function of the TCP/IP stack.
A. PING **
B. IPCONFIG
C. ROUTE
D. ARP
____________ is used to check the status of connections you are attempting
with other systems over NetBIOS. Will help you to see if you have a name
resolution problem too.
A. PING
B. IPCONFIG
C. ROUTE
D. NBTSTAT **
enables you to verify your system is properly configured and that all information
is in fact entered. It can also be used with DHCP to renew or release IP addresses.
A. PING
B. IPCONFIG **
C. ROUTE
D. ARP
1. Name the eleven different tools to troubleshoot TCP/IP.
ping, ipconfig, netstat, nbtstat, route, tracert, arp, Network Monitor, Performance Monitor, Event Viewer, NT Diagnostics
2. What troubleshooting tool lets you find the route taken to reach your destination host?
tracert*
3. What tool enables you to verify basic network connectivity and the function of the TCP/IP stack?
ping*
1. DNS needs:
A. primary, secondary, and cache DNS server
B. to use NSLOOKUP to test DNS resolution **
C. primary and secondary DNS server **
D. to use WINS integration to configure DNS domains
2. Select proper Troubleshooting step order:
A. locate and isolate problem to particular users, determine if users are on same subnet, what is new or has changed. **
B. locate and isolate subnet(s) with problem, determine if users are on same subnet, what is new or has changed.
C. locate and isolate subnet(s) with problem, determine if users have similar problems, what is new or has changed.
D. locate and isolate subnet(s) with problem, determine if users have similar problems, what is new or no longer applies.
3. Which best applies for checking connectivity?
A. use ping or ipconfig /all, Next Verify TCP/IP stack configuration
B. Verify TCP/IP stack configuration, Next establish session with remote host.
C. Establish session with remote host, Next verify TCP/IP stack configuration
D. Use ping or ipconfig /all to verify TCP/IP stack configuration, Next establish session with remote host. **
1. Where can you find system errors in NT Workstation
a. In control panel
In administrative tool
In Event viewer under System ****
IN NT Diagnostics.
2. Where can you find if the services available on the
system are running or not.
a. Event Viewer
Control Panel
System
NT Diagnostics ****
3. What is the command used the verify the functions
of the TCP/IP protocol stacks.
a. IPCONFIG
b. Ping ****
c. NETSTAT
d. ROUTE
1. How do you check to see if you have a dead router?
You try to ping yourself
2.What does ARP do?
It enables you to verify that no static ARP entries exist.
3.How can you used the route command?
You can check that the system has the routes that you expected
What three different logs does Event Viewer follow?
* System; Security; Application
What is the IP address that you should PING in order to verify if a particular workstation that you are working on has it's TCP/IP stack in
good order?
a. 0.0.0.1
b* 127.0.0.1
c. 127.0.0.0
d. 0.0.0.127
1. Which utility helps to determine which port is not working?
a. Network Monitor
b. IPCONFIG
c. NBTSTAT
d. NETSTAT *
2. This is where all the different parts of the the system reports
errors___________
A. NT Diagnostics
B. Network Monitor
C. Event Viewer *
D. Performance Monitor
3. __________ enables you to verify basic network connectivity and the
function of the TCP/IP stack.
A. PING **
B. IPCONFIG
C. ROUTE
D. ARP